Summer Starts Here - Save up to 70%
Curt T-Connector Vehicle Wiring Harness Installation - 2012 Hyundai Veracruz- Video
Hi, there Hyundai owners. Today in your 2012 Hyundai Veracruz, we're going to be taking a look at and showing you how to install CURTs 4 Pole Flat trailer Connector vehicle wiring harness. And this is what our wiring's going to look like when it's installed. Now, our customer did opt for the additional wiring bracket that you can purchase here at etrailer.com. There's plenty of different mounting locations that you could place it.Our wiring is a standard 4 Pole connection that comes with an included dust cap to keep out dirt and debris. And it's going to help put all of your necessary lighting that you'll need when hauling your trailer to keep DOT compliant in all States. more
10/1/2019 1:42:31 PM
Trailer Wiring Harness Installation - 2012 Hyundai Veracruz- Video
Today on our 2012 Hyundai Veracruz, we're going to show you how to install the tow-ready T-One Vehicle Wiring Harness with the 4-pole flat trailer connector. Part Number is 118269. Now, to begin our installation, we need to remove the two caps off our two plugs right here in the rear passenger side. You can see we've got one here. WE need to press the tab in, and then work it backwards so that cap will come off. Knock off any dirt or debris that might be on there. more
8/17/2015 1:56:58 PM
Trailer Wiring Harness Installation - 2012 Hyundai Veracruz C56151- Video
Today on our 2012 Hyundai Veracruz we'll be installing the Curt T-Connector Vehicle Wiring Harness for 4-Pole Flat Trailer Connector, part number C56151. This is our custom-fit wiring harness and will plug directly into the manufacturer's tow package ports. Here on the passenger side, between the wheel well liner, rear bumper cover and hitch, you can locate the two manufacturer's tow ports. Now that we've located them, we need to remove the cap off pf the tow port plug. To do that, we'll press on the locking tab and then remove the cap. To give ourselves a little working room, I'm going to go ahead and take the push pin fastener out that's holding the plug in place. more
11/20/2014 11:48:03 AM
Trailer Wiring Harness Installation - 2009 Hyundai Veracruz- Video
Today on this 2009 Hyundai Veracruz were going to install part number 118529 from Tow Ready. The first thing were going to do is find the ports to plug our wire harness into. Its located on the left hand side of the vehicle right behind the fender and bumper. What were going to do is pop them loose so we get easier access to the caps, and remove the caps. Next well go ahead and route our wire harness through the bumper structure and down to the ports. Its kind of hard to see, but theres a hole in the bumper structure right in front of the frame rail, so you have to take the wire harness and push into that hole and then out toward the back of the bumper. more
1/24/2013 7:12:53 AM
Filter Videos
Filter Videos
